It's really funny to taking the time to make an Silicone glove and mitt is also an excellent way to introduce young people to sewing.it's can help you save money and can make you more clever.

First,you should urchase an Silicone chocolate mould pattern or create your own by tracing a mitten outline or existing oven mitt onto a large piece of paper. Increase the size of the traced mitten 1 inch around the entire pattern outline.And then place the four layers of oven mitt fabrics on a flat work surface in the following order: main fabric right side down, Mylar/heat-resistant batting, cotton batting and lining right side up.Ok, then, Pin the oven mitt pattern to the layers and cut out two pieces of the four layers for each oven mitt.
Quilt each "sandwich" of four layers together by topstitching diagonal lines 1 inch apart. Meandering lines also work well. Stitch around the edges of each half with a zig-zag stitch to hold the layers together. This will also be the seam finish.Last but not the least, you should do is Stitch with a zig-zag around any seam finish area that was cut to remove bulk. Turn the oven mitt right side out and smooth the edges with your hands.

And more warning:To create a hanging loop, sew a small loop of fabric onto one of the lower corners or add two inches of extra bias tape when applying it to the edge.